previous 1 2 3 4 5 6 7 next
How Do You Reduce Existing Formaldehyde Levels?
The choice of methods to reduce formaldehyde is unique to your situation. People who can help you select appropriate methods are your state or local health department, physician, or professional expert in indoor air problems.
Here are some of the methods to reduce indoor levels of formaldehyde:
- Bring large amounts of fresh air into the home. Increase ventilation by opening doors and windows and installing an exhaust fan(s).
- Seal the surfaces of the formaldehyde-containing products that are not already laminated or coated. You may use a vapor barrier such as some paints, varnishes, or a layer of vinyl or polyurethane-like materials. Be sure to seal completely, with a material that does not itself contain formaldehyde. Many paints and coatings will emit other VOCs when curing, so be sure to ventilate the area well during and after treatment.
- Remove from your home the product that is releasing formaldehyde in the indoor air. When other materials in the area such as carpets, gypsum boards, etc., have absorbed formaldehyde, these products may also start releasing it into the air. Overall levels of
formaldehyde can be lower if you increase the ventilation over an extended period.
One method NOT recommended by CPSC is a chemical treatment with strong ammonia (28-29% ammonia in water) which results in a temporary decrease in formaldehyde levels. We strongly discourage such treatment since ammonia in this strength is extremely dangerous to handle. Ammonia may damage the brass fittings of a natural
gas system, adding a fire and explosion danger.
Why Should You Be Concerned?
Formaldehyde is a colorless, strong-smelling gas. When present in the air at levels above 0.1 ppm (parts in a million parts of air), it can cause watery eyes, burning sensations in the eyes, nose and throat, nausea, coughing, chest tightness, wheezing, skin rashes, and allergic reactions.
It also has been observed to cause cancer in scientific studies using laboratory animals and may cause cancer in humans. Typical exposures to humans are much lower; thus any risk of causing cancer is believed to be small at the level at which humans are exposed.
Formaldehyde can affect people differently. Some people are very sensitive to formaldehyde while others may not have any noticeable reaction to the same level.
Persons have developed allergic reactions (allergic skin disease and hives) to formaldehyde through skin contact with solutions of formaldehyde or durable-press clothing containing formaldehyde. Others have developed asthmatic reactions and skin rashes from exposure to formaldehyde.
Formaldehyde is just one of several gases present indoors that may cause illnesses. Many of these gases, as well as colds and flu, cause similar symptoms.
Levels in Homes
Average concentrations in older homes without UFFI are generally well below 0.1 (ppm). In homes with significant amounts of new pressed wood products, levels can be greater than 0.3 ppm.
previous 1 2 3 4 5 6 7 next
© 2012 LazrWeb all rights reserved